|
Product Details:
Payment & Shipping Terms:
|
| Type: | Slow EV Charging Station | Product Name: | EV Charger Station |
|---|---|---|---|
| Output Power: | 7kw | Input current: | 32A |
| Charging gun: | 1 Gun (European Type 2) | Installation method: | Wall-mounted Type Or Stand Type |
| Cable Length: | 5M | Communication: | Ethernet |
| High Light: | Wall-Mounted EV Charger Station,Home Use EV Charger Station,7kw AC EV Charging Pile |
||
New Energy Home Use Wall-Mounted 7kw AC Vehicle Car
EV Charging Pile EV Charger Station
New Energy Home Use Wall-Mounted 7kw AC Vehicle Car EV Charging Pile Product overview
The AC charger is in compliance with SAE J1772, IEC 62196, GB/T20234.
The communication protocol with central management system (CMS) is in compliance with OCPP 1.6 based on ARM architecture and Linux / Android platform.
New Energy Home Use Wall-Mounted 7kw AC Vehicle Car EV Charging Pile Technical parameters
| Item | Specification | E1P-07K-A1-32A-EU01 |
| Input | Input voltage | Single-phase 230V |
| Input current | 32A | |
| Input frequency | 50/60Hz | |
| Output | Output voltage | Single-phase 230V |
| Output power | 7 kW | |
| Output current | 32A | |
| Profile | Charging gun | 1 gun (European type 2) |
| Installation method | Wall-mounted Type | |
| or Stand Type | ||
| Cable length | 5m | |
| Operating temperature | -30 ° C ~ +50 ° C | |
| Storage temperature | -40 ° C ~ +70 ° C | |
| Working humidity | 5%~95% | |
| Communication | Ethernet | |
| Protection level | IP54 | |
| Safety standard | IEC 61851-1:2017 | |
| Interface protocol | OCPP 1.6 | |
| Emergency Stop | Yes | |
| CE certificated | Yes | |
| Security design | Over/under voltage protection, overload protection, short circuit protection, current leakage protection, grounding protection, over temp protection, lightning surge protection, topple & fall down protection |
New Energy Home Use Wall-Mounted 7kw AC Vehicle Car EV Charging Pile Service environment
New Energy Home Use Wall-Mounted 7kw AC Vehicle Car EV Charging Pile Product Details
Wall-Mounted 7kw AC Vehicle Car EV Charging Pile EV Charger Station Application
Transportation and preservation
I. It is recommended to use a forklift for loading work.
II. A lifting ring mounting hole is reserved at the top of the charger.
III. Do not stack the charger during transportation.
IV. Please bundle the equipment securely during transportation to prevent dumping.
V. Please keep the outer packaging of the equipment until the installation site, so as to protect the charger’s enclosure.
VI. Keep the packaging film of the device when long-term storage for moisture protection.
VII. The charger must be erected to prevent tilting or lying on the side.
VIII. Prevent heat source away to the charger.
IX. Store the equipment indoors, keep the environment dry and ventilated, and keep away from the water source.
Contact Person: Ms. Fiona Liang
Tel: 86-13752765943 / 86-0755 23592644
| Factory Address:Building No. 1, No.6 Qifen Street, Liaobu Town, Dongguan, Guangdong, China | |
| Sales office:Shenzhen, China | |
| +00-86-13752765943 | |
| info@estel.com.cn | |
